It is currently Mon Dec 22, 2014 4:29 pm



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: Fujiwara Nashiji Petty 150 sharpening
PostPosted: Fri Jul 11, 2014 2:36 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 7895
Location: Madison Wisconsin
Good morning,

Thank you for making an excellent knife such as this available to me to buy. I have a few questions regarding sharpening that I hope you can help me with.

What exactly is the best way to Sharpen this type of knife? I'm a little intimidated in ruining the geometry.

It looks to be an assymetrical knife. So do I touch up the microbevels and when I feel that it needs to be thinned a bit, grind along the blade face by holding the beneath the yamaguri line to maintain the appropriate angle?

Also, is this an assymetrical knife or single bevel? The back side seems to have a very low angle microbevel.

Thank you for your time.

Lambros



_________________
Mark Richmond
Chefknivestogo

Chefknivestogo New Arrivals
Offline
 Profile  
 
 Post subject: Re: Fujiwara Nashiji Petty 150 sharpening
PostPosted: Fri Jul 11, 2014 6:16 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2931
A single bevel knife, traditionally, has it's entire bevel on one side and is hollow backed. Yanagi, deba, and usuba being the big three.....but there are a crap load of other styles.

So, no, this knife is not single beveled. It's a double bevel knife. Yes, it's asymmetrically ground. To what degree, I'm not sure....probably 60/40 or so.

Try to follow the factory's grinding as best as you can. However, don't stress over it THAT much. Many people successfully use asymmetrically ground knives, sharpening them themselves, without ever knowing they are.

How....waterstones:

http://www.chefknivestogo.com/sharpening-stones.html

A great starter set:

http://www.chefknivestogo.com/knshcoset.html



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: Fujiwara Nashiji Petty 150 sharpening
PostPosted: Sat Jul 12, 2014 2:33 am 

Joined: Sat Mar 01, 2014 7:15 am
Posts: 1441
Location: Raleigh, NC
The element you're looking at isn't a microbevel. That's the primary bevel. Quite a few Japanese kitchen knives have very small primary bevels as a result of being so thin behind the edge. The hardness of the steel and its tendency to be used in a more ideal situation than almost any other edged instrument also allow for some very low angles, sometimes in single digits. Your listed sharpening process, though, is correct. As you sharpen it you can either move the cutting point back to the center line of the knife or try to maintain it by sharpening both sides roughly evenly, your decision.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred