It is currently Mon Sep 26, 2016 9:49 am

All times are UTC - 6 hours



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 2 [ 18 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Sharpening on a shoe string
PostPosted: Sat Mar 08, 2014 10:13 am 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 1:18 pm
Posts: 10458
Location: Madison Wisconsin
Some of my customers get put off by the seeming high cost of sharpening and that's a shame because you can get good results with very little money. Let's discuss some methods on how to sharpen your knives with as little money as possible. I have a number of money saving tips but I'll let you guys take a swing at it first.



_________________
Mark Richmond
Chefknivestogo
Chefknivestogo on Facebook
Chefknivestogo on Instagram
Chefknivestogo on Twitter
Chefknivestogo on Youtube
Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sat Mar 08, 2014 11:57 am 

Joined: Fri Mar 29, 2013 4:29 pm
Posts: 495
Buy a combo stone.
Use cardboard or newspaper to strop on
Use wet/dry sandpaper on a piece of glass to flatten your stone until you can afford a plate.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sat Mar 08, 2014 12:36 pm 
User avatar

Joined: Thu Apr 11, 2013 6:07 pm
Posts: 370
Cheapest method I can think of would be sand paper on a mouse pad


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sat Mar 08, 2014 12:59 pm 

Joined: Thu May 24, 2012 12:20 am
Posts: 4067
One stone is all you need. Many 1k stones are ~$50, use sandpaper or even pavement to flatten and you can get a lot of work done.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sat Mar 08, 2014 2:30 pm 

Joined: Tue Feb 19, 2013 8:22 pm
Posts: 1512
And here I am thinking that some damn fool was stropping on an actual shoe string.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sat Mar 08, 2014 3:19 pm 
User avatar

Joined: Mon May 28, 2012 6:29 pm
Posts: 1642
I've actually heard of shoe string stropping for serrated blades.

3M wet/dry sandpaper from the local auto parts store is probably the cheapest and the most effective.

Norton Crystlon oil stone, fast cutting silicon carbide with a average cost between $10-$20. It's a coarse stone with the fine being 280 grit but produces mud like a waterstone that can be captured and applied to a strop which will greatly refine the edge to razor sharp.

Beyond that a basic 1k & 6k waterstone is tough to beat though likely to be in the $60-$100 range.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sun Mar 09, 2014 1:43 am 

Joined: Thu Jan 30, 2014 4:57 pm
Posts: 181
I've actually sharpened knives on those dressing stones they give away with diamond abrasive wheels. The stones are free and the results are... better than nothing, I guess.

For the non-metal-workshop-operator, I'm gonna agree with Mark and say wet & dry sandpaper, but glued to a piece of glass.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sun Mar 09, 2014 1:48 am 

Joined: Tue Jan 21, 2014 12:56 pm
Posts: 392
I've used the bottom of a coffee cup.

I got started with a Smith's Tri-hone from Lowe's. It was better than nothing and better than the pull through the kitchens had. I think it was $20. Flatted it with sandpaper on a stainless steel table.

Now I have stones that cost more than knives so stuff can happen.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sun Mar 09, 2014 5:01 am 
User avatar

Joined: Sun Feb 02, 2014 12:19 am
Posts: 316
RedWattle wrote:Buy a combo stone.
Use cardboard or newspaper to strop on
Use wet/dry sandpaper on a piece of glass to flatten your stone until you can afford a plate.



+1 this would also be my recommendation to start up on the cheap.


Offline
 Profile  
 
 Post subject: Re: Sharpening on a shoe string
PostPosted: Sun Mar 09, 2014 11:01 am 
User avatar

Joined: Thu Apr 11, 2013 6:07 pm
Posts: 370
A lot of glued on glass recommendations. I did a quick search, but didn't find much. Where would one find cheap glass blanks?


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 2 [ 18 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred