You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!
If you want to match the existing bevel, use a Sharpie marker to paint the edge bevel on both sides. Set your angle on your sharpening system to remove most of the marker, making sure you're hitting the edge of the edge. The angles might not be the same for both sides - it depends on who and how it was sharpened from the company. If that's the case, find a happy medium and cut your own edge bevel.
If you use the EP and have the drill stop collar, definitely use that to compensate for your different stone thicknesses for the best edge.
If you need more info, the Edge Pro forum has tons of great how-to advice.
turbo v6 camaro
Post subject: Re: Richmond Ultimatum AEB-L sharpening
it say on the site they are at 15 degress so after it got dual (was very sharp from factory) I just set it at 15 and ground until it was a good edge, I found one side was more about 16-17 so i just ground it down.
I use the shapton glass stones, i have the hole line and they sharpen nicely ( i don't have the 32K lol)
Users browsing this forum: No registered users and 3 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum