It is currently Thu Apr 24, 2014 2:13 am



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: How to stabilize my stones.
PostPosted: Fri Jul 26, 2013 11:28 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 6600
I bought a couple of Naniwa sharpening stones with base and tried them out but they slip around on my counter . Any suggestions for something to provide a rock solid base? Also, do these stones need to be flattened occassionally and if so is there a diamond plate you'd recommend? Thanks, Steve



_________________
Mark Richmond
Chefknivestogo

Richmond Laser
Offline
 Profile  
 
 Post subject: Re: How to stabilize my stones.
PostPosted: Fri Jul 26, 2013 11:34 pm 
User avatar

Joined: Thu Nov 22, 2012 4:17 am
Posts: 2619
Buy some stick-on little rubber feet from HomeDepot.

Yes you need to flatten your stones when needed.
Flattening plate: http://www.chefknivestogo.com/140grdistflp.html



_________________
Those who say it can't be done are always passed by those doing it.
Offline
 Profile  
 
 Post subject: Re: How to stabilize my stones.
PostPosted: Fri Jul 26, 2013 11:43 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 6600
Another option is some of that rubber mesh drawer liner you can find in places like you find at bed bath and beyond would work.

If you wanted to spend some money the naniwa sink bridge works great too.



_________________
Mark Richmond
Chefknivestogo

Richmond Laser
Offline
 Profile  
 
 Post subject: Re: How to stabilize my stones.
PostPosted: Sat Jul 27, 2013 4:15 am 
Forum Moderator
User avatar

Joined: Wed May 16, 2012 4:42 pm
Posts: 2918
Location: USA... mostly.
STEVE <> Another option is a damp rag on the counter; cotton - not polyester, linen, rayon, etc. I have yet to find anything that works better.



_________________
Embracing the silence amid a life and land full of static...
Offline
 Profile  
 
 Post subject: Re: How to stabilize my stones.
PostPosted: Sat Jul 27, 2013 11:22 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 4:45 am
Posts: 966
I made my own sink bridge that you see in a lot of my sharpening videos on youtube as kenneths123, but if you are not inclined to make one yourself, that naniwa sink bridge looks like an excellent choice. I personally like the idea of using my stones over the sink rather than on a countertop. Most of the stones I use don't have bases and I use a stoneholder for them and lock the holder in place on the bridge. One of my pet peeves is watching someone do a stone video with the stone banging around.

A paper towel under a stone helps keep the stone in place and when you are done and ready to switch stones, toss the paper towel.

---
Ken



_________________
My Facebook Page
Ken'sCorner
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred