It is currently Tue Sep 16, 2014 1:04 am



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: Profile comparison
PostPosted: Sat Jun 15, 2013 11:38 am 

Joined: Mon Jun 03, 2013 2:34 am
Posts: 21
I am hoping someone out there has a Calphalon Katana chefs knife and could compare the blade profile to their gyato. Thanks!


Offline
 Profile  
 
 Post subject: Re: Profile comparison
PostPosted: Sat Jun 15, 2013 2:57 pm 

Joined: Fri Jun 29, 2012 11:56 am
Posts: 211
Location: Austin, TX
I actually have a Katana set. I never use it now that I have a few Moritakas, but for a fairly low-cost mass produced knife they are pretty good. Superior to my German stuff, but not the Japanese stuff Mark carries. I have had my set for years and they have heald up really well. I could definitely see this set lasting a lifetime.

I would call their overall feel as thick, heavy, and a shape that is a little different. The look pretty cool and hold their edge really well.

Overall 340mm
edge from spine to tip 205mm
Height at spine 54mm
thickness at spine 10mm
tapers to 3mm in about 40mm
then holds the 300 to the 180mm mark before tapering to the point
weight 262g



_________________
Troy
Austin, Texas
Offline
 Profile  
 
 Post subject: Re: Profile comparison
PostPosted: Sat Jun 15, 2013 3:01 pm 

Joined: Fri Jun 29, 2012 11:56 am
Posts: 211
Location: Austin, TX
then holds the 3mm to the 180mm mark before tapering to the point



_________________
Troy
Austin, Texas
Offline
 Profile  
 
 Post subject: Re: Profile comparison
PostPosted: Sat Jun 15, 2013 3:10 pm 

Joined: Mon Jun 03, 2013 2:34 am
Posts: 21
Could you compare the blade edge to you Moritakas? Like place the heel on the board, for both and describe how the ark? The Katanas seem very straight, straighter than my Addict. Maybe they are more like a Kiritsuke?


Offline
 Profile  
 
 Post subject: Re: Profile comparison
PostPosted: Sat Jun 15, 2013 3:28 pm 

Joined: Fri Jun 29, 2012 11:56 am
Posts: 211
Location: Austin, TX
The Katana has more belly than my Moritaka 250mm and Fujiwara 240mm Guytos. This is not exactly a good comparison due to the length difference, but both the other knives have a flat profile from the heel to around 150mm where the Katana is flat only to about 80mm. Also, the Katana has a slight ark at the heel so the flatness falls roughly between the 15mm-80mm range.

The heel could be from some of my sharpening but I don't think so as the steel is very hard and does not abrade quickly. Also I remember when using it that I would often miss the portion at the heel. I have never held an Addict, so I cannot directly compare to that particular knife.



_________________
Troy
Austin, Texas
Offline
 Profile  
 
 Post subject: Re: Profile comparison
PostPosted: Sat Jun 15, 2013 4:03 pm 

Joined: Mon Jun 03, 2013 2:34 am
Posts: 21
Thanks a lot Badboy!


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred