It is currently Thu Jul 24, 2014 1:15 pm



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: How to use Balsa?
PostPosted: Mon Aug 13, 2012 1:41 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 7188
Location: Madison Wisconsin
Hi!
What compund do you advice me to use on balsa? Do I have to put some compund on the balsa everytime I strop?

best regards, D.



_________________
Mark Richmond
Chefknivestogo

Chefknivestogo Blog
Offline
 Profile  
 
 Post subject: Re: How to use Balsa?
PostPosted: Mon Aug 13, 2012 1:43 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 7188
Location: Madison Wisconsin
You can use a variety of sprays and compounds. My favorite is Boron Carbide on balsa. Here is a video showing me apply it. You don't have to re-apply every time. It last for dozens of uses before you need more. Apply sparingly just to cover the balsa.




_________________
Mark Richmond
Chefknivestogo

Chefknivestogo Blog
Offline
 Profile  
 
 Post subject: Re: How to use Balsa?
PostPosted: Mon Aug 13, 2012 11:33 pm 

Joined: Fri Jun 29, 2012 11:56 am
Posts: 207
Location: Austin, TX
So if you wanted to go strop crazy after using you final stone, first the 1micron on balsa, then would .5micron on balsa or leather be finer than straight horse butt?

In the end are we really just spliting micons? I have a horse butt strop that has collected some 1micron diamond spray, thinking about applying .5micron boron carbide and then finishing with just the horse butt . . . thoughts???



_________________
Troy
Austin, Texas
Offline
 Profile  
 
 Post subject: Re: How to use Balsa?
PostPosted: Tue Aug 14, 2012 4:02 am 
User avatar

Joined: Wed Apr 25, 2012 2:55 pm
Posts: 473
My favorite on balsa is boron carbide, too.

But if you go from a 10k stone to a 1 micron strop, you will be able to remove all the scratches from the stone, then to .5 micron after that, you will be able to polish the edge clean of all the teeth. This may or may not be a good idea. I say try it and see what happens. Basically, take a peek at the Grand Unified Grit Chart, and remember that putting compounds on balsa is pretty much just making a poor man's polishing stone.

Abrasive loaded anything will be harsher than unloaded anything. So BC on balsa is going to scratch whereas smooth leather is just going to straighten and buff.



_________________
Eamon Burke
http://burkecutlery.com
Offline
 Profile  
 
 Post subject: Re: How to use Balsa?
PostPosted: Fri Aug 17, 2012 4:04 am 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 4:45 am
Posts: 1173
"I have a horse butt strop that has collected some 1micron diamond spray, thinking about applying .5micron boron carbide and then finishing with just the horse butt . . . thoughts???"

I don't think it is a good idea to go with a finer compound when a coarser one has been previously been applied.

I feel it makes sense to NOT take a hugh jump between the highest grit stone and the compound. Where you begin with compounds on strops like balsa after using stones is really a complex subject. Thus one could follow a 30k stone with tenth micron CBN or Poly diamond at one extreme - beyond the reach of any stone - or follow a 1k stone with a 4.5 micron CBN on Balsa.

---
Ken

A 1 micron particle is approximately a 16k stone, so this is perfectly reasonable to use following a 10k stone.



_________________
My Facebook Page
Ken'sCorner
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred