It is currently Fri Jul 01, 2016 11:00 am

All times are UTC - 6 hours



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 3 [ 22 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 1:10 am 

Joined: Sat Apr 26, 2014 10:33 am
Posts: 131
I use the DMT plate to flat my stones, if the stone 24 or 60 grit (like Nubatama Ume) can I use this plate or there is other way to flat it...


Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 8:01 am 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 1:36 pm
Posts: 3330
You can still use it to flatten those stone's. However, if they're dished a lot.....flatten them somewhat on a sidewalk or some such first....then finish with the plate.



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 8:24 am 

Joined: Mon May 28, 2012 6:29 pm
Posts: 1565
I wouldn't, it will chew up your diamond hone.

I have a 60 grit and don't even bother to flatten it. It's not a very good stone to begin with so I only use it to flatten other stone which it's not very good at either.


Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 9:35 am 
User avatar

Joined: Wed Nov 21, 2012 10:17 pm
Posts: 7335
Location: Derby City, Kentucky
I can't imagine ever needing a 24 or 60 grit stone when any repairs or thinning can be done quickly with plates in the 140 range.



_________________
If God wanted me to be a vegetarian he wouldn't have made animals taste so good.
Online
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 10:17 am 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 1:36 pm
Posts: 3330
2x72 ceramic belts work way faster. :o



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 10:26 am 
User avatar

Joined: Wed Nov 21, 2012 10:17 pm
Posts: 7335
Location: Derby City, Kentucky
Not if you don't have one. :mrgreen:



_________________
If God wanted me to be a vegetarian he wouldn't have made animals taste so good.
Online
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 11:38 am 

Joined: Mon May 28, 2012 6:29 pm
Posts: 1565
Actually, gluing coarse belts to a board makes for a great coarse "stone", much faster in most cases. Home Depot sells some diablo belts that work well for this.


Back on subject,
To flatten such coarse stones a lapping powder and a hard surface tends to work best. I would go with 36 grit powder.


Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 11:45 am 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 1:18 pm
Posts: 10119
Location: Madison Wisconsin
Sidewalk is a good suggestion. I never use super coarse stones either btw. 150 Nubatama is about as low as we go with stones.



_________________
Mark Richmond
Chefknivestogo
Chefknivestogo on Facebook
Chefknivestogo on Instagram
Chefknivestogo on Twitter
Chefknivestogo on Youtube
Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 12:07 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 1:36 pm
Posts: 3330
Jason B. wrote:Actually, gluing coarse belts to a board makes for a great coarse "stone", much faster in most cases. Home Depot sells some diablo belts that work well for this.


That's an awesome idea.....never thought of that.



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: Very rough stone flatting?
PostPosted: Mon Apr 28, 2014 12:31 pm 

Joined: Wed Dec 05, 2012 10:00 am
Posts: 60
I think I would use a drywall sanding screen as a flattener for such coarse stones. This one is 100 grit, but you can get them in 220 grit, too.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 3 [ 22 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred