It is currently Thu Nov 27, 2014 11:27 pm



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 4 posts ] 
Author Message
 Post subject: How to Find Proper Sharpening Angle
PostPosted: Wed Apr 09, 2014 9:00 pm 

Joined: Fri May 17, 2013 12:06 pm
Posts: 15
Hi All,

I have been sharpening my own knives for about a year now. I'm no expert at all, but I am alright at getting a sharp edge.

For my current knives, I've known the correct sharpening angles (sharpening angle from shop/factory) through the manufacturers or product reviews. For example, I know my Shun is a 50/50 edge at 16 degrees. When I sharpen I don't get too picky about a keeping an exact angle as long as my sharpening stroke is not wobbly and consistent.

I have two knives that I will be sharpening for the first time in the near future and I've no idea what the angles are - the Tojiro DP 210 Gyuto and the Masakage Yuki 240 Gyuto. I'm not obsessed with necessarily maintaining these factory angles, but I would like to know what they are. Any ideas on how to find out this info?

Thanks


Offline
 Profile  
 
 Post subject: Re: How to Find Proper Sharpening Angle
PostPosted: Wed Apr 09, 2014 9:06 pm 
User avatar

Joined: Thu Nov 22, 2012 4:17 am
Posts: 4610
Use the sharpie trick to find the angle. Should be around 15*.



_________________
Those who say it can't be done are always passed by those doing it.
Offline
 Profile  
 
 Post subject: Re: How to Find Proper Sharpening Angle
PostPosted: Wed Apr 09, 2014 9:09 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2874
+1 to the Sharpie Trick......paint the edge with a Sharpie, and make a few passes on a dry stone adjusting the angle until you're removing the Sharpie across the entire bevel.

And please do keep in mind that the factory bevel angle on most knives can be safely lowered. I typically lower them a bit each sharpening until they fail and then go back up a touch.



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: How to Find Proper Sharpening Angle
PostPosted: Thu Apr 10, 2014 7:47 am 

Joined: Tue Oct 29, 2013 9:21 pm
Posts: 427
Numbers are only a suggestion. Just carefully keep the angles as consistent a possible. Raise a burr on one side, sharpen other side and hope that both edges meet without creating a pronounced wire edge. It's nearly impossible to eliminate burr in it's entirety but if you do a good job keeping consistency the edge will be good.

Just because you can sharpen at steeper angle doesn't necessarily mean it's better. Suppose you happen to sharpen at a less steep angle but do a very good at keeping the angles consistent. I don't think you are going to complain about the performance :)


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 4 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred