It is currently Fri Nov 21, 2014 4:33 pm

All times are UTC



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: Three Petty's and a Paring Knife
PostPosted: Mon Dec 09, 2013 6:11 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2862
Paring knife specs:
Blade length - 83mm or 3.25"
Blade steel - AEB-L heat treated to 61 HRC
Blade height at the heel - 21mm or 0.8"
Handle material - Stabilized redwood burl
Handle construction - Full tang western handle with two corby bolts and a center mosaic pin
Blade thickness at spine is - 0.085" or 2.15mm over heel & 0.03" or 0.76mm at 1.5mm from the tip.
Blade thickness at the edge is 0.007 prior to sharpening heel to tip.

Pics:

Image

Image

Specs on buckeye burl petty:
Blade length - 160mm or 6.3"
Blade steel - AEB-L heat treated to 61 HRC
Blade height at the heel - 32mm or 1.25"
Handle material - Stabilized buckeye burl
Handle construction - Full tang western handle with two corby bolts and a center mosaic pin
Blade thickness at spine is - 0.10" or 2.54mm over heel & 0.04" or 0.1mm at 1.5mm from the tip.
Blade thickness at the edge is 0.007 prior to sharpening heel to tip.

Pics:

Image

Image

Image

Specs on walnut petty:
Blade length - 151mm or 6"
Blade steel - AEB-L heat treated to 61 HRC
Blade height at the heel - 32mm or 1.25"
Handle material - Stabilized walnut burl
Handle construction - Full tang western handle with two corby bolts and a center mosaic pin
Blade thickness at spine is - 0.10" or 2.54mm over heel & 0.04" or 0.1mm at 1.5mm from the tip.
Blade thickness at the edge is 0.007 prior to sharpening heel to tip.

Pics:

Image

Image

Specs on redwood petty:
Blade length - 155mm or 6.1"
Blade steel - AEB-L heat treated to 61 HRC
Blade height at the heel - 32mm or 1.25"
Handle material - Stabilized redwood burl
Handle construction - Full tang western handle with two corby bolts and a center mosaic pin
Blade thickness at spine is - 0.10" or 2.54mm over heel & 0.04" or 0.1mm at 1.5mm from the tip.
Blade thickness at the edge is 0.007 prior to sharpening heel to tip.

Pics:

Image

Image

Image

Picture of the group together:

Image



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Online
 Profile  
 
 Post subject: Re: Three Petty's and a Paring Knife
PostPosted: Mon Dec 09, 2013 10:50 pm 
Forum Moderator

Joined: Tue Feb 05, 2013 6:00 pm
Posts: 2472
Those are beautiful Adam! Very nice work - how are you liking your new shop?


Offline
 Profile  
 
 Post subject: Re: Three Petty's and a Paring Knife
PostPosted: Tue Dec 10, 2013 2:43 am 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2862
I love my new shop. Clean side stays dust free for the most part, more lighting, and laid out a lot better.

And thanks Steve!! :)



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Online
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred