It is currently Mon Sep 22, 2014 2:23 pm



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: Learning to sharpen.
PostPosted: Fri Nov 08, 2013 8:15 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 7517
Location: Madison Wisconsin
Hi, I have a 7" (approx) Wusthof Classic Santoku knife that needs to be honed with a steel and possible sharpened as well. I have no experience doing this but have read a lot and watched some videos of how to use a honing rod and use sharpening stones so I'm willing to jump in and learn. However, looking through the many options and reading various opinions, it's been challenging to narrow things down. Any suggestions? It looks like for the rod, the MAC black looks good as well as the idahone. For the stones, not sure which grit to get. One thing that might add to this is that in the future, I am looking to get a more traditional chef's knife, like the MAC Pro 240 which I have read great things about.

Thanks in advance for your help,
Chris



_________________
Mark Richmond
Chefknivestogo

Chefknivestogo Blog
Offline
 Profile  
 
 Post subject: Re: Learning to sharpen.
PostPosted: Fri Nov 08, 2013 8:21 pm 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 7517
Location: Madison Wisconsin
Hi Chris,

Sharpening is easy and fun so I encourage you to give it a try. Once you try come back and let us know any questions you have and we'll help. Let's forget about a rod for the moment since that is primarily for edge maintenence not sharpening.

For a simple solution just get this combo stone:
http://www.chefknivestogo.com/imtwosi1kst.html

Mark the edge with a sharpie and sharpen the knife on the 1K side at the angle that removes the mark. Once you generate a burr flip it over and repeat. Then flip the stone to the 6k side and repeat the process again but go light with pressure. Run the knife through something like cork to make sure you have removed the burr and you're done.



_________________
Mark Richmond
Chefknivestogo

Chefknivestogo Blog
Offline
 Profile  
 
 Post subject: Re: Learning to sharpen.
PostPosted: Fri Nov 08, 2013 11:18 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2780
As Mark said a combo stone is a good way to get into sharpening. If you want to get a little more into it, get two stones. A 1,000 grit and a 6,000. Getting two stones will last longer and there are more options.



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: Learning to sharpen.
PostPosted: Sat Nov 09, 2013 4:39 am 
User avatar

Joined: Thu Nov 22, 2012 4:17 am
Posts: 3997
Location: Kentucky
As good as it gets for a honing rod. http://www.chefknivestogo.com/id12cerodwna.html
An excellent set to start sharpening with. http://www.chefknivestogo.com/4pcshstset.html



_________________
Those who say it can't be done are always passed by those doing it.
Offline
 Profile  
 
 Post subject: Re: Learning to sharpen.
PostPosted: Sun Nov 10, 2013 1:40 pm 

Joined: Sun Nov 10, 2013 1:38 pm
Posts: 13
Thanks for the info - very helpful. I like the Sharpie idea.

I do have some knives, other smaller kitchen knives (Shun) that are sharp but I have not honed. Mark - any recommendations on the honing rod?

Thanks,
Chris


Offline
 Profile  
 
 Post subject: Re: Learning to sharpen.
PostPosted: Sun Nov 10, 2013 4:02 pm 

Joined: Sun Nov 10, 2013 1:38 pm
Posts: 13
Jeff B wrote:As good as it gets for a honing rod. http://www.chefknivestogo.com/id12cerodwna.html
An excellent set to start sharpening with. http://www.chefknivestogo.com/4pcshstset.html


Thanks for this - I missed it the first time. I have heard good things about the Idahone.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred