It is currently Fri Dec 19, 2014 4:35 pm

All times are UTC



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 8 posts ] 
Author Message
 Post subject: My New Workshop
PostPosted: Thu Oct 17, 2013 3:02 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2925
Many of you know that my family and I have been quite busy as of late.

For those of you that don't:

We went on a much needed vacation in early September and within the week after getting back we packed up a house we'd lived in for 11 odd years. Packing up a small house, crammed full of stuff, was quite an adventure I tell you....I swear stuff kept popping up out of thin air.

We were moving to a larger house across town....a much needed move I mean to tell you. Part of my great excitement over the move is the opportunity to have a much larger and nicer shop space.

I haven't worked in my shop now for some 7 or 8 weeks and I've really been itching to get back in. But, the new shop needed set up. Electricity run, benches built, shelves built, everything set in place, etc. I had to work all of this in between getting the rest of the house unpacked and set up for my family. After several weekends, it's finally close enough that I can play once again.

Here are some pictures of the new set up:

Image

The shop is set up into two areas.....a dirty side and a clean side. The dirty side will only have pieces of equipment that make dust.....no other tools. Something I learned from the last set up I had was that cleaning up around a bench that had misc. tools, pieces of wood, double sided tape, bottles of epoxy.....ALL manners of junk lying around.....and was covered in dust was a royal PITA. Now, I won't have that issue. Turn on the shop vac and clean.

Image

On the dirty side is the belt grinder, disc sander, hand sanding station, mill, bandsaw, and drill press.

The mill only got moved successfully because I have a friend I've known since college who played for the Huskers as a lineman.....he's a big sumbiatch and he struggled immensely with moving the mill. I would never had been able to move it without him.

Image

On the outside of the dirty room is a set of shelves. So much storage room now....I couldn't be happier. I used to have stuff scattered about the house and it irritated my wife.

Image

I know have a full size bench on the clean side as well. Still need to do a little work on this side though including adding a light fixture above the bench.

I'm also not going to show the world my marvelous electrical job either. I did it myself with some phone help from an electrician I know. He came over afterwards and okay'd it to be safe to use but laughed at my work primarily because the conduit I ran is all crooked.....it was getting late last Friday night and I wanted to be done. :o

Still need to find a storage solution for my belts, do a little more work to the poly wall, run electricity for the kiln eventually, and several other small items....but at least I can play soon.

And.....it's inside, air conditioned and heated. No more freezing my ass off going to the garage (where my old shop was) in January. Plus....now we have a garage we can use.



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Thu Oct 17, 2013 3:29 pm 
Forum Moderator
User avatar

Joined: Wed May 09, 2012 3:59 pm
Posts: 1738
Location: Cape Town - South Africa
As I said....it sure looks like business it does!

Cool.

Keep it that neat please.....

:)



_________________
PICKLED IN SQUADRON RUM
Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Thu Oct 17, 2013 4:43 pm 
User avatar

Joined: Fri Oct 26, 2012 6:36 pm
Posts: 511
Location: Sweden Stockholm
Looking real good Adam!



_________________
http://www.Str8Shave.com
Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Thu Oct 17, 2013 6:33 pm 
Forum Moderator
User avatar

Joined: Wed May 16, 2012 4:42 pm
Posts: 3849
Location: USA... mostly.
ADAM <> Living the dream, man. GOOD FOR YOU! Image



_________________
Embracing the silence amid a life and land full of static...
Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Wed Oct 30, 2013 3:44 pm 

Joined: Tue Oct 29, 2013 9:21 pm
Posts: 427
So who is going to be the lucky person to get a historic knife made firstly in the new shop?

Also...can you please have somebody update your website? The knives look gorgeous, the photos are great, but a little more product info...How about some price approximations.

You should have shown the electric guy to the door with one of your knives :) Who cares if the conduit is crooked, are you looking at it?


Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Wed Oct 30, 2013 9:08 pm 
User avatar

Joined: Thu Nov 22, 2012 4:17 am
Posts: 4722
Now we need pictures of it all dirty!



_________________
If at first you don't succeed, pay someone that knows what they're doing.
Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Tue Nov 05, 2013 6:40 pm 
Forum Moderator
User avatar

Joined: Mon Apr 23, 2012 7:36 pm
Posts: 2925
The dirty side is definitely dirty already. But, I'm happy to report that the clean side is staying dust free which is so very nice.

Going in and out of the poly curtain is a pain in the ass, I'll have to admit. But, I'll put up with it for the benefit.



_________________
Adam

Image
http://marrknives.com
http://facebook.com/marrknives
Offline
 Profile  
 
 Post subject: Re: My New Workshop
PostPosted: Thu Nov 07, 2013 12:13 am 

Joined: Tue Jun 05, 2012 9:20 pm
Posts: 35
Nice! Glad you could move the mill.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred