It is currently Mon Oct 20, 2014 11:31 am



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 2 of 2 [ 12 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: How much pressure do you use when sharpening?
PostPosted: Sat Jul 20, 2013 12:41 am 
User avatar

Joined: Fri Mar 29, 2013 5:46 pm
Posts: 217
I used to sharpen a lot like Steve, but when KCMa got me to increase speed, I had to lower pressure to maintain "touch" and angle consistency. I never use firm pressure anymore. Max is moderate (5 - 7lbs at a guess) I use less pressure (moderate/light) to chase the burr and still less (light) to polish.

Moderate/light for all stropping except final polishing -- which I try to keep light enough (light) to NOT draw a wire.

The variations in pressure are consistent with moving a lot of metal, pulling a burr, chasing the burr, and polishing. The way I sharpen, more pressure than necessary is counter-productive. Not just because of feedback and bobble, but because a lot of pressure means big burrs.

On the other hand, going too light (e.g., "very light" or "feather light") in order to avoid drawing more burr than you want risks the same problems as going too strong; i.e., screwing with touch and angle. So the minimum pressure is enough to "click in" and feel the bevel against the stone or strop. The exception to "not too light" is a honing rod. Pressure should never be more than "very light" on a rod.

My way is not the only way, or the "right way." It's just one way; the way I happen to use now; and a way which works for me as well as anything else.

BDL


Offline
 Profile  
 
 Post subject: Re: How much pressure do you use when sharpening?
PostPosted: Sat Jul 20, 2013 1:42 am 
Forum Moderator

Joined: Tue Feb 05, 2013 6:00 pm
Posts: 2385
Thanks BDL - that makes a ton of sense. I just simulated my sharpening pressure on my kitchen scale and I was surprised how much pressure I had to use just to hit 3-5 lbs. I've been using 1 to 2 or so pounds max. I've also probably been going much too light when polishing and stropping, thus losing my "locked in" feeling.

I'm not going to target a specific pressure, but I will try a bit more when setting a bevel on coarser stones, and try a little more pressure during some other sharpening phases and see if I can get "clicked in" better. I think that's what I'm missing in getting better edges.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 2 of 2 [ 12 posts ]  Go to page Previous  1, 2


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred