It is currently Wed Aug 16, 2017 7:29 am

All times are UTC - 6 hours

Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!

 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: Maera - Nice JNat to follow 1K synthetics
PostPosted: Wed Jun 05, 2013 4:11 pm 

Joined: Thu Mar 21, 2013 6:44 pm
Posts: 161
Location: Northern Virginia
Hi Guys,

Thought I'd share a recent experience with my fellow sharpening fanatics.

I really wanted to try a Japanese natural and given that I wanted to "feel" the edge in use, getting a JNat I could insert in place of my usual finishing stone was the direction I headed in.

As a general rule, my day to day sharpening goes : Bestor 1.2K > Rika 5K, and to be honest, I was pretty happy with that combo. Both stones feel great, are fast, and leave an edge I really like, i.e. dead nutz sharp but with a little tooth. So with this in mind, the Maera replaces the Rika.

The short version of the result is : Friggen Awesome!!!!!!!!!!!

The longer version in no particular order:

I've never used a natural before so wasn't ready for the smell. When you wet it and hit it with the slurry stone, it smells a bit like fresh rain out in the woods. Adds a really nice vibe to the sharpening experience.

Next thing I liked is how easily the knives got seriously sharp. While I've never had any issues getting carbon steel sharp enough to push cut paper at this grit level, I had to work with a lot more finesse to get German steel to do the same. Not so with the Maera. Both the carbon steel and German steel got noticeably sharper on the Maera than I could get them on the Rika, in less time, and with less effort and skill.

I also used the Maera to polish one side of a blade and the Rika the other. While the scratch pattern of the Maera was far more defuse than the Rika, what also stood out is after the session, I had to flatten the Rika where I did not have to flatten the Maera at all. In fact, so far, I've sharpened 6 knives on the Maera and polished a blade, and with the exception of when I first got it, its not needed any maintenance at all.

My conclusion is this. After researching naturals, I called Ken Schwarz because I was pretty much totally confused. He recommended the Maera and I liked it so much, I ended up calling him again to see what he could suggest I try in place of the Bestor. Another JNat is headed my way, woot :)

On a side note, I was under the impression that JNats where really expensive. What I've learned is that JNats have a wide price range and price is not necessarily tied to performance. Much of the high JNat price is related to rarity, or color, or smell, or being in some way unusual. What I learned is that if I just wanted a very functional JNat, I could spend in the same range I would a synthetic and get a great result.

Loving this rabbit hole :)

 Post subject: Re: Maera - Nice JNat to follow 1K synthetics
PostPosted: Wed Jun 05, 2013 6:49 pm 

Joined: Fri Aug 03, 2012 4:01 pm
Posts: 258
Branwell, let me be the first to say congratulations on your discovery. Jnats, like many different expenditures in life, can indeed become a "Rabbit hole" of sorts. However I agree with your assessment, Jnats offer unique performance and results that are hard to duplicate with man-made efforts. Plus, it doesn't need to cost a paycheck if you put forth some effort to talk to the right people. And yes, it's hard to beat that earthy smell.


 Post subject: Re: Maera - Nice JNat to follow 1K synthetics
PostPosted: Wed Jun 05, 2013 7:04 pm 
Forum Moderator

Joined: Thu Apr 26, 2012 11:13 am
Posts: 3173
Location: CT
I know the feeling! I also got a Meara recently and a Yaginoshima Asagi, awesome edges, especially on carbon steels! The Meara is a strange stone, but in a good way! Stone feels very hard and it feels coarser than my Aoto, which is a bit harder than normal Aoto's and is estimated 3-5K grit range instead of the usual 2-4K. The Meara will give that sticky sharp edge with bite to many steels, hard or soft, but when you are sharpening, it feels like you are using a much coarser/rougher feeling stone, yet it gives the finish and edge of a much smoother stone. I sharpened up an Artifex Honesuki today and tried all of my other J Nat stones, looking for a clean edge with some tooth to it and the Meara won that round hands down! Takashima, Ozuka Asagi, Shobu, Aoto and the Rika 5K were all bested by the Meara for the best edge!

Yes, that smell is really soothing for some reason. Nice earthy smell!

Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: