It is currently Wed Aug 27, 2014 11:11 am



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 2 posts ] 
Author Message
 Post subject: Best Convex Edged Knives
PostPosted: Mon Apr 29, 2013 11:18 pm 

Joined: Tue Apr 02, 2013 3:15 am
Posts: 63
I was wondering what the best convex ground knives are on the site. Also wondering what the thinnest knives behind the edge are.


Offline
 Profile  
 
 Post subject: Re: Best Convex Edged Knives
PostPosted: Tue Apr 30, 2013 12:58 am 
User avatar

Joined: Fri Mar 29, 2013 5:46 pm
Posts: 217
The thinner the knife, the less it needs convexing. Lasers aren't (usually) discernibly convexed, because they don't need to be.

As a rule, extremely thin knives are also thin "behind the edge." Typically, lasers are (usually) are among the thinnest "behind the edge" knives, because they're the thinnest knives. [Note: I'm bracketing "behind the edge" in quote marks because thinning behind the edge is just a multi-bevel with a wide, flat intermediate bevel between face and edge.]

Convexing is another form of multi-bevel. The benefits of a convex face grind will be negated somewhat by "thinning behind the edge." Convex edge grinds are durable considering how sharp you can get them, and vice versa; but they aren't a whole lot better than ordinary two-stage multi-bevels; and given the right knife, aren't a whole lot better than flat ground edge bevels.

Any reasonably thin knife can be made very thin behind the edge with a little work on the stones; and any decent knife can be made just damn near as thin as anything else with a lot of work on a sander. As long as the knife can be made thin enough to suit your needs, consider other aspects of the knife as more important. Think of that as a corollary to the general rule not to buy an expensive knife you can't keep sharp.

The best face and edge geometries for a given user and knife are highly contingent on the knife and user. In other words, don't get nuts about a particular set of characteristics unless you know why you want them.
There's no magic combination which will automatically be sharper.

In my own knife kit, the softer, tougher knives which are most susceptible to impact burring benefit most from double-bevels. The stronger, harder knives which better resist going out of true, do not.

BDL


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 2 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred