It is currently Thu Aug 21, 2014 12:15 pm

All times are UTC



Welcome
Welcome to chefknivestogo

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!





 Page 1 of 1 [ 2 posts ] 
Author Message
 Post subject: Chosera 800 Grit Stone Review
PostPosted: Tue May 15, 2012 1:19 am 
Site Admin
User avatar

Joined: Thu Apr 19, 2012 7:18 pm
Posts: 7335
Location: Madison Wisconsin
chosera 800 stone
http://www.chefknivestogo.com/ch800grstba.html
Rating:5
Name:Chris Griggs
Location (City, State):Review:I purchased this stone to use as a more aggressive alternative to my Sigma Power 1k. I’m finding it to be a great foundation stone for resharpening edges that need a bit more than just a quick touchup. I would categorize it as a 1k on steroids, as it does the same job just faster. It also has that same lovely, consistent, and smooth feel of the whole Chosera line. It’s quite fast, especially when freshly lapped, and while it does leave slightly coarser scratches then a 1k, it is still fine enough that I can use it in the same progression in which I was using my Sigma 1k. While your mileage may vary, in most cases, I believe you could go to the same stones from this that you would go to from a 1k. On edges that are either small, hollow ground, or micro beveled, I’ve been jumping from it all the way up to my Snow White 8k. This may not work for you knife and razor guys, but many of us woodworkers love being able to do these big jumps. On larger areas of steel, such as blade backs, I put my Sigma Power 6k into the mix, and while it does take out the 800 scratches without any trouble, I’m thinking a Chosera 3k, which I’ve used but do not own, would be an ideal stone to follow the 800. I was expecting this stone to be quite thirsty, and while it works best with a soak, it works quite well with a heavy splash; the water tends to sit on top for a while rather than being sucked into the stone right away. Also, because it is relatively hard and fast it really helps you to get your edge geometry correct at the get go. So far I’m also finding this stone less prone to overloading and clogging than some of the other Chosera’s I’ve used, and I think I like it a little better than the Chosera 1k, which I don’t own, but have used a number of times and quite like also. This stone doesn’t get a lot of press, presumably because it is an 800 where as 1k’s tend to be more popular, but keep in mind that a Shapton 1k is also technically an 800 grit stone under the current JIS rating system. If you are looking for a “medium” grit foundational stone, the Chosera 800 is a serious force to reckoned with. I highly recommend it!



_________________
Mark Richmond
Chefknivestogo

Chefknivestogo Blog
Offline
 Profile  
 
 Post subject: Re: Chosera 800 Grit Stone Review
PostPosted: Thu May 17, 2012 9:32 pm 
User avatar

Joined: Tue May 01, 2012 9:36 pm
Posts: 43
A great review. I agree that the 800 is a fantastic stone that seems to be a bit overlooked while standing in the shadow cast by the superb 1k. I find myself using the 800 quite frequently to follow the 140 Atoma or 320 Shapton Pro.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 2 posts ] 

All times are UTC


Who is online

Users browsing this forum: Karnstein and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


suspicion-preferred